Free calculator

Landed cost calculator for an import container

Add up what a container really costs to your door: the goods, your quoted freight, delivery and brokerage lines, duty, the two customs user fees at the rates in force, and the extra charges importers were billed at your port. Nothing you type leaves your browser.

How it’s calculated

Freight Benchmarks' landed cost calculator adds the price of the goods, the ocean freight, delivery trucking and customs brokerage you were quoted, duty at the rate you enter on the entered value, the merchandise processing fee at 0.3464% of the entered value between $34.58 and $670.86 per entry, the harbor maintenance fee at 0.125%, and the extra charges importers were billed after arrival at your port, per shipment and per year.

Freight Benchmarks found that extra charges after arrival averaged $174 per US import container shipment first invoiced July 2024 to June 2026, counting the shipments that paid none; 43.6% of shipments paid at least one, and the port average ran from $35 at the Port of San Juan, Puerto Rico to $360 at the Minneapolis–St. Paul rail hub. The calculator uses your port's figure.

The shipment

One ocean import shipment, delivered to one US address. The port picks the measured extra charges; everything else is yours.

Where the container is discharged or railed to. Each published port has its own measured figures.

Per-container lines are multiplied by this.

Like this one. Adds a yearly column to the estimate.

Adds the typical chassis rental bill and counts the trucking fees among the likely extras. Untick it if you arrange trucking yourself.

The goods and customs

Duty, the merchandise processing fee and the harbor maintenance fee are worked out from the entered value. Leave the value blank to skip them.

The entered value for the whole shipment: usually the price paid to the supplier, without international freight and insurance.

One combined percentage: the general rate for the tariff classification plus every additional layer that applies to the goods and their origin. Blank: duty left out. See where to find it.

Your quote (optional)

The lines a forwarder quoted you. Freight Benchmarks publishes no freight rates, so anything blank here stays out of the total and the estimate says so.

Port to port, with the surcharges the quote includes.

The drayage base rate and fuel to your door, before chassis and extras.

The entry fee and ISF filing, as quoted.

Documentation, handling, destination charges listed separately, cargo insurance.

A reserve for one delay

The average extra charges spread a few expensive shipments across many cheap ones. If this shipment can’t afford a surprise, budget for one delay as well.

This calculator needs JavaScript, which is off in your browser. You can work it out by hand: add the goods, the quoted freight, delivery and brokerage lines, duty at your rate on the entered value, the two customs fees in the table below, and your port’s average extra charges from the port table.

The customs user fees on a formal entry

Two fees go on a formal entry on top of duty. Both are percentages of the entered value; only the merchandise processing fee has a floor and a cap, and US Customs and Border Protection adjusts those for inflation every October 1. The harbor maintenance fee is charged on cargo unloaded from a vessel, so ocean imports pay it and air, truck and rail imports don’t.

In force since October 1, 2026. Source: Customs User Fees To Be Adjusted for Inflation in Fiscal Year 2027, CBP Dec. 26-14, 91 FR 48398 (July 31, 2026); 19 CFR 24.23(b)(1)(i) and 19 CFR 24.24. Checked October 29, 2026.
FeeRateMinimum per entryMaximum per entryApplies to
Merchandise processing fee (MPF)0.3464%$34.58$670.86Ad valorem on the entered value of each formal entry, between the minimum and the maximum per entry. The rate is set by 19 U.S.C. 58c(a)(9)(B)(i); the limits are adjusted for inflation each fiscal year.
Harbor maintenance fee (HMF)0.125%NoneNoneAd valorem on the value of cargo unloaded from a vessel at a US port, with no minimum and no maximum. Not charged on air, truck or rail imports.

Extra charges after arrival, by port

Freight Benchmarks measures what importers were billed after the container landed: the fees quotes leave out. The average spreads every extra charge over all shipments, including the ones that paid none, so it is a budget line, not a bill. The chassis rental bill is shown apart, because nearly every trucked container pays one.

US import container shipments first invoiced July 2024 to June 2026, importer-weighted. Extra charges: every accessorial fee this site tracks except chassis rental and wharfage, averaged per shipment. Delay fees: demurrage, per diem, storage or chassis extra days. Chassis rental: the median bill per container on trucked single-container shipments that paid one; a dash means the port publishes no figure. Lowest average first. Freight Benchmarks, data version 2026-10-22.
Port or rail hubAverage extra charges per shipmentShipments with any extra chargeShipments with a delay feeMedian chassis rental bill per container
San Juanseaport, 460 shipments$358.7%7.3%—
Miamiseaport, 964 shipments$6322.1%12.6%$70
Savannahseaport, 145 shipments$10222.3%13.4%—
Long Beachseaport, 736 shipments$12932.3%20.5%$165
New York / New Jerseyseaport, 343 shipments$15537.0%29.3%$165
Houstonseaport, 211 shipments$16149.9%28.0%$165
Los Angelesseaport, 578 shipments$18342.6%35.3%$165
Chicagoinland rail hub, 712 shipments$19156.6%44.9%$150
Omahainland rail hub, 554 shipments$23665.4%52.6%$135
Port Evergladesseaport, 94 shipments$24841.5%28.7%—
Seattleseaport, 123 shipments$25048.0%35.5%—
Tampaseaport, 87 shipments$26157.5%23.0%$146
Minneapolis / St. Paulinland rail hub, 536 shipments$36084.3%74.4%$135
All ports in the data8,298 shipments, including 10 ports with too few importers to publish$17443.6%34.8%$165

How much an import container costs after it lands, and why the average isn’t your budget

What landed cost includes

Landed cost is everything it takes to get the goods to your door, not just the ocean rate. For a container imported by sea into the US it has eight parts:

  1. The goods, at the price you pay the supplier.
  2. Ocean freight, port to port, with the surcharges the carrier or forwarder bundles into the rate.
  3. Delivery trucking (drayage) from the port or rail ramp to your door, with fuel.
  4. The chassis the container rides on, rented by the day. Nearly every trucked container pays for one.
  5. Customs brokerage: the entry fee and the Importer Security Filing.
  6. Duty, at the rate for your goods and their origin, on the entered value.
  7. The customs user fees: the merchandise processing fee and, on ocean cargo, the harbor maintenance fee.
  8. Extra charges billed after arrival: storage, demurrage, per diem, chassis splits and extra days, exams, waiting time. Quotes leave them out, and they are the part Freight Benchmarks measures.

Lines 2, 3 and 5 come from your quote. Line 6 comes from the tariff schedule. Line 7 is set by law. Lines 4 and 8 come from what importers were actually billed, port by port.

How the calculator adds it up

The goods, the quoted lines, duty and the fees are added for the shipment; the ocean freight, the delivery trucking, the chassis bill and the extra charges are multiplied by the number of containers. For the chassis the calculator takes the median chassis rental bill per container at your port on trucked single-container shipments that paid one, or the figure for all ports when your port publishes none. For the extra charges it takes your port’s average per shipment, which spreads every accessorial fee this site tracks, except chassis rental and wharfage, across all shipments at that port, including the ones that paid nothing. Tick the reserve to add the median demurrage and per diem bills on top, for a shipment that can’t afford a surprise. Give it the number of shipments a year and it adds a yearly column.

Each line says where it came from: you, the law or the data. Blank lines stay out of the total, and the estimate says which ones.

How duty, MPF and HMF are worked out

All three are percentages of the entered value: for most imports, the price actually paid or payable for the goods, without the international freight and insurance. The calculator assumes one formal entry per shipment.

  • Duty is the entered value times the rate you enter, as one combined percentage.
  • The merchandise processing fee (MPF) is 0.3464% of the entered value on each formal entry, but no less than $34.58 and no more than $670.86. Below about $34.58 divided by the rate the floor applies; above the cap, every extra dollar of goods adds nothing. The estimate tells you when either binds. US Customs and Border Protection adjusts the floor and the cap for inflation every October 1; the figures here are the ones in force since October 2026.
  • The harbor maintenance fee (HMF) is 0.125% of the value of cargo unloaded from a vessel at a US port, with no floor and no cap. Air, truck and rail imports don’t pay it.

The calculator doesn’t cover informal entries, entries into a foreign-trade zone, or excise taxes on goods such as alcohol and tobacco.

Where to find your duty rate

The rate depends on the tariff classification of the goods and on where they were made, not on the port. Look the classification up in the Harmonized Tariff Schedule, published by the US International Trade Commission; the “General” column gives the base rate for most trading partners. Then add every layer that applies to the goods and their origin: additional duties under Section 301, Section 232 and other trade measures, which the schedule lists in Chapter 99, or a lower preferential rate under a trade agreement. Enter the sum as one percentage. A licensed customs broker determines the classification and the layers that apply, and is the person to ask when the goods, their origin or the measures in force are unclear.

What the data adds

Everyone can add up a quote. What a quote doesn’t show is what gets billed afterwards. In Freight Benchmarks’ invoice data, 43.6% of US import container shipments first invoiced July 2024 to June 2026 paid at least one extra charge, and the charges averaged $174 per shipment across all shipments, including the ones that paid nothing. The port matters: the table above ranks every published port and rail hub by that average. Containers railed to inland hubs are handled twice, which shows up as chassis splits and chassis days; see why container fees are higher at inland rail hubs. On the same shipments, when demurrage was charged, the median bill was $404 per container and 1 in 10 was over $1,360; that is the reserve the calculator offers.

What it leaves out

  • The ocean rate itself. Freight Benchmarks publishes no freight rates and doesn’t arrange freight; type the rate from your quote.
  • Wharfage and the other port tariff charges, which are usually inside the freight rate or the destination charges on your quote.
  • A customs bond, cargo insurance and the Importer Security Filing, unless you put them in the quoted lines.
  • Several entries on one shipment, which pay the merchandise processing fee once each.
  • Less-than-container (LCL) shipments, whose destination charges are priced per cubic meter.

When the invoices come, put each line through the freight bill checker to see how it compares with what other importers paid. If a container is going to miss its last free day, the demurrage and detention calculator prices the days for your dates and rates.

Questions about landed cost

How do I calculate the landed cost of a container?

Add the price of the goods, the ocean freight, the delivery trucking and chassis, the customs brokerage, duty and the customs user fees, and the extra charges billed after arrival. Duty and the fees are percentages of the entered value: duty at the rate for your goods, the merchandise processing fee at 0.3464% between $34.58 and $670.86 per entry, and the harbor maintenance fee at 0.125%. For the extra charges, Freight Benchmarks found an average of $174 per shipment across all US import container shipments first invoiced July 2024 to June 2026, counting the shipments that paid none; the calculator uses your port's own average.

How much is the merchandise processing fee (MPF)?

On a formal entry it is 0.3464% of the entered value, but never less than $34.58 or more than $670.86 per entry, the limits in force since October 2026. US Customs and Border Protection adjusts the minimum and maximum for inflation every October 1; the rate itself is set by statute. The calculator applies the floor and the cap and tells you when one of them binds.

What is the harbor maintenance fee (HMF)?

A fee of 0.125% of the value of cargo unloaded from a vessel at a US port, with no minimum and no maximum. It is charged on ocean imports only: air, truck and rail imports don't pay it. It funds the dredging and upkeep of harbors and channels.

How much should I budget for extra charges after the container arrives?

Start from your port's average and keep a reserve for one delay. Freight Benchmarks found that extra charges averaged $174 per shipment across all US import container shipments first invoiced July 2024 to June 2026, counting the shipments that paid none, and that 34.8% of shipments paid at least one delay fee. When demurrage was charged, the median bill was $404 per container on single-container shipments, and 1 in 10 was over $1,360. The calculator's reserve option adds the median demurrage and per diem bills to the total.

Does the calculator include the ocean freight rate?

Only if you type it in. Freight Benchmarks publishes no freight rates and is not a freight forwarder, so the ocean freight, the delivery trucking and the brokerage fee come from the quote in your hands. What the site adds is the part quotes leave out: the extra charges billed after arrival, measured from importers' invoices, port by port.

Is this estimate a quote, or customs advice?

Neither. It is arithmetic on the figures you enter, the fee rates in force and what other importers were billed. Duty depends on the tariff classification, the origin of the goods and the trade measures in force, and a licensed customs broker determines it; the fee limits change every October. A licensed forwarder partner can quote the freight lines and clear the goods, with every fee in writing.

Sources

Free quote · no obligation

Want a landed-cost quote with nothing left out?

Tell us the lane. One licensed forwarder partner that serves it quotes ocean freight, customs clearance and delivery together, with free time, chassis days and accessorial rates in writing before you book.

  • Drayage, chassis and port fees listed line by line
  • Free time and demurrage terms in writing before you book
  • A reply within one business day
A red semi truck hauling a trailer on a tree-lined interstate

Request a quote

More about the shipment (optional, helps the partner quote faster)
Who books the ocean freight today?
What went wrong recently?

For companies importing commercial cargo. Freight Benchmarks is not a forwarder and doesn't arrange freight. The quote is free, comes from the partner, and you're under no obligation.