Free calculator
Container fill calculator: FCL or LCL, and how many containers
Enter the cargo's volume and weight. See how many containers of each type it needs, how full they would be compared with the fill rates real shipments ran, whether space or weight sets the count, and where LCL stops being cheaper than a full container. Nothing you type leaves your browser.
How it’s calculated
Freight Benchmarks' container fill calculator divides your cargo volume by the nominal volume of each container type, takes the fewest containers that load to the study's well-loaded mark, and shows the fill of each box against what 1,152 real full-container-load shipments ran: a median 82.6% of nominal volume, with 37.1% of shipments well loaded and 8.4% shipped less than half full. With the weight it adds the density, and with two quotes it prices the cargo as LCL and as FCL.
Freight Benchmarks measured declared cargo volume against container capacity on 1,152 full-container-load shipments (1,760 containers), mostly from South China to US and Canadian ports, with vessel departures from 2020 to 2023. The median shipment filled 82.6% of its containers' nominal volume, 52.8% carried light cargo under 150 kg per cubic meter, and 82.4% of the containers were 40-foot high cubes.
Your estimate
| Container type | Containers | Fill of nominal volume | Space left | Cargo weight per container | What sets the count |
|---|
Want the box, or the cube, quoted?
Tell us the lane. One licensed forwarder partner that serves it quotes full-container and less-than-container options against your actual cargo, with every destination fee in writing before you book.
Get a quote with this estimateThis calculator needs JavaScript, which is off in your browser. You can work it out by hand: divide the cargo volume by the container’s nominal volume in the table below, and compare the result with the fill rates the study measured.
Container capacities, and how full shipments really are
The calculator measures fill against the nominal internal volume of each container type, the same yardstick as the fill-rate study, so your shipment is compared like with like. Nominal volume can’t be reached in practice: cartons and pallets leave gaps, and the study treats a box at 85.0% or more as well loaded.
| Container type | Nominal volume | Well loaded, from | Share of containers in the study |
|---|---|---|---|
| 20-foot | 33 m³ | 28.1 m³ | 10.4% |
| 40-foot | 67 m³ | 57.0 m³ | 5.3% |
| 40-foot high cube | 76 m³ | 64.6 m³ | 82.4% |
| 45-foot high cube | 86 m³ | 73.1 m³ | 1.9% |
| Period | Shipments | Median fill | Under half full | Well loaded | Median density | Light cargo |
|---|---|---|---|---|---|---|
| 2020 | 536 | 82.0% | 9.5% | 38.5% | 161 kg/m³ | 43.4% |
| 2021 | 327 | 82.9% | — | 40.1% | 150 kg/m³ | 50.0% |
| 2022-2023 | 289 | 82.9% | — | 33.3% | 116 kg/m³ | 69.6% |
| All periods | 1,152 | 82.6% | 8.4% | 37.1% | 141 kg/m³ | 52.8% |
How the calculator works
Fill is the cargo volume divided by the nominal internal volume of the containers, the same measure as the fill-rate study, so your shipment is compared with what other importers’ shipments actually ran rather than with a brochure. For each container type the calculator takes the fewest boxes that load to the study’s well-loaded mark, 85% of nominal volume, and shows how full each would be and how much space would be left. Pick the type you were quoted and enter a box count to test it: the calculator says whether the boxes would be well loaded, part full, less than half full, or more than they can hold.
With the gross weight it works out the density in kilograms per cubic meter and says whether the cargo is light, below the study’s 150 kg per cubic meter line, in which case space sets the cost, or dense, in which case weight may. If you know the cargo weight one container may carry on the road, the calculator adds containers when weight runs out before space.
What the data says about fill
Freight Benchmarks measured the declared cargo volume against container capacity on 1,152 full-container-load shipments, 1,760 containers, mostly from South China to US and Canadian ports, with vessel departures from 2020 to 2023. The median shipment filled 82.6% of its containers’ nominal volume. 37.1% of shipments were well loaded, and 8.4% shipped less than half full. The cargo was mostly light: the median density was 141 kg per cubic meter across all periods, and 52.8% of shipments carried light cargo, under the study’s line. 82.4% of the containers were 40-foot high cubes, the box that gives light cargo the most space per dollar.
Those figures describe one trade flow, mostly a single origin port, and the feed behind them ended in 2023. They are a yardstick for how full a box can realistically be loaded, not a forecast for your lane.
LCL or FCL
A less-than-container shipment is priced per cubic meter, a full container per box. Divide the FCL rate for one container by the LCL rate per cubic meter and you have the volume at which they cost the same; below it LCL is cheaper on the freight, above it the box wins. Two things decide whether that holds in practice. First, both rates have to run to the same point: LCL destination charges are priced per cubic meter too and can be a large share of the total, so compare all-in rates. Second, a full container is the importer’s own box, delivered as one unit, while LCL cargo is consolidated, deconsolidated and handled at a warehouse at each end, which adds days and handling. The calculator prices the cargo both ways from the two rates you enter and says where the break-even lies.
What it leaves out
- Usable volume. Nominal volume is the yardstick, not what fits; pallets, carton sizes and stacking decide the rest. The well-loaded mark is the practical ceiling the study saw.
- The weight limit on the road. It varies by state, chassis and container, so the calculator takes the figure your trucker gives rather than guessing one.
- Freight rates. Freight Benchmarks publishes none; the LCL and FCL comparison uses the rates you enter.
- Special equipment: open tops, flat racks and reefers, which have their own capacities.
For the rest of the cost, carry the container count into the landed cost calculator, which adds your quoted lines, duty and the customs fees, and the extra charges importers were billed at your port.
Questions about container fill
How many cubic meters fit in a 40-foot high cube container?
The nominal internal volume is 76 cubic meters, against 67 for a standard 40-foot, 33 for a 20-foot and 86 for a 45-foot high cube. Nominal volume can't be reached in practice, because cartons and pallets leave gaps. In Freight Benchmarks' fill-rate study the median full-container-load shipment used 82.6% of its containers' nominal volume, and a well-loaded box reaches about 85%. The calculator uses the same yardstick, so a shipment can be compared with what others achieved.
How full should a container be?
As full as the cargo and the road allow. Freight Benchmarks found that 37.1% of 1,152 full-container-load shipments were well loaded, at 85% of nominal volume or more, and that 8.4% shipped less than half full. A half-empty box is usually a timing decision, shipping before an order is complete, and it costs the same ocean freight as a full one. The calculator shows what your box count does to the fill, and prices the alternative as LCL when you have a rate.
Is my cargo light or dense?
Divide the gross weight by the volume. Freight Benchmarks found a median density of 141 kg per cubic meter, and 52.8% of shipments under 150, the study's light-cargo line. Light cargo fills the space long before the weight limit, so volume sets the cost and a high cube or 45-foot box lowers the cost per cubic meter. Dense cargo such as tile, stone and machinery hits the road weight limit first, and may need more containers, a tri-axle chassis or a permit.
When is LCL cheaper than FCL?
When the cargo is small enough that the per-cubic-meter LCL rate, all in, comes to less than a whole container. Divide the FCL rate for one container by the LCL rate per cubic meter: that is the volume at which the two cost the same, and below it LCL is cheaper on the freight. The comparison only holds when both rates run to the same point, because LCL destination charges are priced per cubic meter and can be a large share of the total. The calculator does the division with the two rates you enter; Freight Benchmarks publishes no freight rates.
Does the calculator know the weight limit for a container on US roads?
No, because there isn't one figure. The legal weight of a truck, chassis and loaded container together is set by federal and state rules, and the cargo weight that leaves room under it depends on the tractor, the chassis and the container's own weight. Ask the forwarder or trucker for the cargo weight one container may carry on the lane, enter it, and the calculator adds containers when weight runs out before space. In Freight Benchmarks' invoice data, 4.1% of trucked US import container shipments were billed an overweight fee, with a median bill of $170 when charged.
Is this estimate a quote?
No. It is arithmetic on the cargo figures you enter, the nominal container volumes and, if you add them, the two rates in your hands. The fill rates it compares against are historical and describe one trade flow, mostly South China to North America. A licensed forwarder partner can quote the container and the LCL option against your actual cargo, with every destination fee in writing.
Sources
- Freight Benchmarks: how full ocean containers really are, the fill-rate study
- Freight Benchmarks: overweight container fees, how often they apply and what they cost
- Freight Benchmarks: methodology, the rules behind every figure
- US Federal Highway Administration: federal size and weight limits for commercial vehicles
- Freight Benchmarks figures: Anonymized line-item forwarder invoices billed to US importers, contributed through the Freight Benchmarks data partner program, in which every partner is a licensed US freight forwarder and customs broker. Aggregates only. See the methodology.
Free quote · no obligation
Shipping light cargo? Price by the cube.
Tell us the lane. One licensed forwarder partner that serves it compares box sizes and LCL against your actual cargo volume, with every destination fee spelled out before you book.
- Drayage, chassis and port fees listed line by line
- Free time and demurrage terms in writing before you book
- A reply within one business day

Request a quote